Friday, March 19, 2010

BATCH MANUFACTURING RECORD REVIEW: PROCESS CONTROL DOCUMENTATION

BATCH MANUFACTURING RECORD REVIEW: STERILE PHARMACEUTICAL MANUFACTURING PROCESS CONTROL DOCUMENTATION IN PHARMACEUTICAL INDUSTRY

Manufacturers should build process and environmental control activities into their aseptic processing operation. It is critical that these activities be maintained and strictly implemented on a daily basis. The requirement for review of all batch records and data for conformance with written procedures, operating parameters, and product specifications prior to arriving at the final release decision for an aseptically processed product calls for an overall review of process and system performance for that given cycle of manufacture. All in-process and laboratory control results must be included with the batch record documentation in accordance with section 211.188. Review of environmental and personnel monitoring data, as well as other data relating to acceptability of output from support systems (e.g., HEPA / HVAC, WFI, steam generator) and proper functioning of equipment (e.g., batch alarms report; integrity of various filters) are considered essential elements of the batch release decision.

While interventions and/or stoppages are normally recorded in the batch record, the manner of documenting these occurrences varies. In particular, line stoppages and any unplanned interventions should be sufficiently documented in batch records with the associated time and duration of the event. In addition to lengthened dwell time of sterile product elements in the critical area, an extensive intervention can increase contamination risk. Sterility failures have often been attributed to atypical or extensive interventions that have occurred as a response to an undesirable event during the aseptic process. Written procedures describing the need for line clearances in the event of certain interventions, such as machine adjustments and any repairs, should be established. Such interventions should be documented with more detail than minor events. Interventions that result in substantial activity near exposed product or container closures or that last beyond a reasonable exposure time should, where appropriate, result in a local or full line clearance.

Any disruption in power supply, however momentary, that could affect product quality is a manufacturing deviation and must be included in batch records (CFR 211.100, 211.192).

Regulations pertaining to sterile pharmaceutical manufacturing , batch review records

21 CFR 211.100(a) states that “There shall be written procedures for production and process control designed to assure that the drug products have the identity, strength, quality, and purity they purport or are represented to possess. Such procedures shall include all requirements in this subpart. These written procedures, including any changes, shall be drafted, reviewed, and approved by the appropriate organizational units and reviewed and approved by the quality control unit.”

21 CFR 211.100(b) states that “Written production and process control procedures shall be followed in the execution of the various production and process control functions and shall be documented at the time of performance. Any deviation from the written procedures shall be recorded and justified.”

21 CFR 211.186 and 211.188 address, respectively, "Master production and control records" and "Batch production and control records."

21 CFR 211.192 states that “All drug product production and control records, including those for packaging and labeling, shall be reviewed and approved by the quality control unit to determine compliance with all established, approved written procedures before a batch is released or distributed. Any unexplained discrepancy (including a percentage of theoretical yield exceeding the maximum or minimum percentages established in master production and control records) or the failure of a batch or any of its components to meet any of its specifications shall be thoroughly investigated, whether or not the batch has already been distributed. The investigation shall extend to other batches of the same drug product and other drug products that may have been associated with the specific failure or discrepancy. A written record of the investigation shall be made and shall include the conclusions and followup.”

Here is interesting article gmp guidelines on FDA guidelines world wide pharmaceutical industry
Pharmaceutical industry pharmaceutical companies

Good Manufacturing practices in pharmaceuticals

No comments: